Your cart is empty.
Your cart is empty.
Description
This glue dispensing machine is made of high-quality iron and aluminum, and adopts exquisite an spray painting process, ensuring a long service life. Its good performance and efficient work can make your work more time-saving and labor-saving. It will be your right-hand man on the job.
Details
Four Support Feet: The sturdy four non-slip support feet can provide additional support and better maintain the stability of the product.
Round Corners: They can take care of your skin, thus improving the safety of use.
How to Install the Tube
1.After screwing off KNOB-A slightly, back CLAMP-A and insert TUBE.
2.After aligning TUBE at the V-shape of CLAMP BASE, use CLAMP-A to advance it to lock KNOB-A with proper force.
3.Pull one side of the TUBE to the side of CLAMP-B, and lock the TUBE GUIDE at one side. Then hang TUBE GUIDE HOLDER to lock.
4.On CLAMP-B, pull the TUBE tight slightly and then use the same method of CLAMP-A to fix the TUBE.
5.Rotate the ROTATOR for 5 times with hands in an anti-clockwise direction to tension the TUBE. (If the TUBE is loose, fix CLAMP-B to tension TUBE).
Operation Order
1.After inserting the AC 110V plug into the socket, press the switch.
2.Install TUBE.
3.Set the condition for action.
4.Set VACUUM ANGLE according to the operation content.
5.Press FOOT SWITCH (FINGER SWITCH) to operate.
6.Rotation direction: CW (clockwise direction), (Dispensing direction) CCW (anti-clockwise direction).
7.Dispensing form:①Rotation angle: start the set angle② STEADY: start continuously running until the input signal ends.③ CONTI: when running stops at normal state, change to Rotation Angle and Steady mode.
Application
This product can be widely used in manufacturing factories and stores for shoe making (insole spraying, sponge wrapping), toys (bonding, fixation, insulation), packaging, small household appliances, wires, hardware, small accessories, handicrafts, hair clips, and electronic products. It is used for liquids and is mainly applied to household appliances, optics, mechanical hardware, electronic industry, electronic components and other fields.
Specification
Color: Grey, Golden
Model: TP-50
Material: Iron and Aluminum
Surface Treatment: Painted
Style: Modern
Power Source: Corded Electric
Number of Sets: 1
Shape: Rectangular
Number of Items: 1
Assembly Required: Yes
Mount Type: Countertop
Power Supply: AC 110V, 60 Hz
Power: 10w
Spitting Mode: Manual / Semi-automatic
Rotor Revolution: 0-160RPM
Timer: Dispensing Rotating Angle: 0-999°, Vacuum Rotating Angle: 1-999°
Minimum Dispensing Amount: 0.0001cc (When Use Φ0.2* Φ0.7)
Dispensing Viscosity: Below 5000cps, 0-1000CPS (Use Φ0.2*Φ0.7, Φ0.5*Φ1.0 Tube), 1000-5000CPS (Use Φ0.5* Φ1.0, Φ1.0*Φ1.5 Tube)
Dissipated Power: 30VA
Plug Type: US Standard
Power Cord Length: About 1.1m/3.61ft
Product Size:17.5*14*9cm/6.88*5.51*3.54in
Package Included
1* Glue Dispenser Machine
1* Dispensing Pen
1* Power Cord
1* Foot Switch
1* Chinese Manual
All Accessories for Installation
Notes
1.Please note that faults occur when the terminals are connected to the power supply.
2.Please note that give out dispense signal at TIME MODE.
3.Please note that the signal of dispense ends signal will not be given out at STEADY or CONTINUOUS MODE.
4.Please note that the items with spot checks of 1-2 times weekly.
5.Please note that the supply oil to ROTOR ROLLER. If there is foreign matter or dirt on the ROLLER, use a clean cloth to wipe it.
6.Please note that the knife or file is not permitted to remove the f-oreign matter or f-ile on the ROLLER. This may shorten the service life of TUBE and cause damage to ROLLER.
7.Please note that if the TUBE is found damaged or clinging to the ROLLER, it should be removed completely. Otherwise, this may be the reason for damage when installing a new TUBE.
8.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.
$149.00
$ 61 .99 $61.99